Maple Systems Silver Plus Series Installation And Operation Manual page 190

186
16-bit Binary
32-bit Binary
16-bit Unsigned
16-bit Signed
32-bit Unsigned
32-bit Signed
32-bit Float
6. Check the Mask box to hide the value with asterisks.
7. In the Number of Digits section, select how the data is to be represented.
Format
16-bit BCD
32-bit BCD
16-bit Hex
32-bit Hex
16-bit Binary
32-bit Binary
16-bit Unsigned
16-bit Signed
32-bit Unsigned
32-bit Signed
32-bit Float
8. The Unsigned, Signed, and Float formats have the option of scaling the data. To display a
scaled value, check the Do Conversion box. In the Engineering Low field, enter the lowest
value that the OIT is to display. In the Engineering High field, enter the highest value that the
OIT is to display. The conversion will also use the Low and High limits specified in the
Limits section.
9. In the Limits section, first select if the Input Low and High values will be entered directly, or
read from a series of PLC registers. If read from a register, the Low Limit is read from the
specified register, and the High Limit is read from the next consecutive register. In either
case, the valid ranges are listed below.
1010-1007, Rev 05
00... to 11... (16 bits)
00... to 11... (32 bits)
0 to 65,537
-32,768 to +32,768
0 to 4,294,967,295
-2,147,483,647 to +2,147,483,647
-9999999999.9999999999 to
9999999999.9999999999
Options Range
Left of Dec. Pt. 1 to 11
Right of Dec. Pt. 0 to 11
Left of Dec. Pt. 1 to 11
Right of Dec. Pt. 0 to 11
Left of Dec. Pt. N/A
Right of Dec. Pt. N/A
Left of Dec. Pt. N/A
Right of Dec. Pt. N/A
Left of Dec. Pt. N/A
Right of Dec. Pt. N/A
Left of Dec. Pt. N/A
Right of Dec. Pt. N/A
Left of Dec. Pt. 1 to 11
Right of Dec. Pt. 0 to 11
Left of Dec. Pt 1 to 11
Right of Dec. Pt. 0-11
Left of Dec. Pt 1 to 11
Right of Dec. Pt. 0-11
Left of Dec. Pt 1 to 11
Right of Dec. Pt. 0-11
Left of Dec. Pt 1 to 11
Right of Dec. Pt. 0-11
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
16 Binary Digits
32 Binary Digits
16-bit Unsigned Integer
16-bit Signed Integer
32-bit Unsigned Integer
32-bit Signed Integer
IEEE754 Single Precision
Description
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Displays 4 hex digits to the left of the Decimal Point
No digits are displayed to the right of the Decimal Point
Displays 8 hex digits to the left of the Decimal Point
No digits are displayed to the right of the Decimal Point
Displays 16 binary digits to the left of the Decimal Point
No digits are displayed to the right of the Decimal Point
Displays 32 binary digits to the left of the Decimal Point
No digits are displayed to the right of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
Digits to display to the left of the Decimal Point