204
3. Select the Display Area tab:.
• In the Profile Color section, check the Transparent checkbox if you wish the frame and
background of the XY plot to be invisible. Otherwise, select the frame and background colors.
• In the Curve section, select the channel number to configure and then set pen properties and how
the plot will display in the Maker section.
• In the Reference line section, check the Limit from PLC checkbox if checked, the low and high
limits are read from controller register. Then set PLC name, Device type and Address.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual