Table of Contents
Advertisement
130
To create a rectangle
1. From the Draw menu, click Rectangle or click the Rectangle icon in the Draw toolbar. The
Attributes dialog box appears.
2. If the interior of the rectangle is to be filled with a color, check the Filled box. Two
additional settings appear.
3. If you want to fill the rectangle with a solid color, then select a color for the Interior box.
Click Pattern Style to display the Pattern Style dialog box. Select the upper left-most
pattern for a solid color. If you want to use a pattern for the filled section of the rectangle,
then select from the available patterns, and click OK to exit the Pattern Style dialog box. In
the Attributes dialog box, select the Pattern color.
4. In the Frame section, click the pull-down arrow of the Color box and select a color. Click
OK in the Color dialog box to go back to the Attributes dialog box.
5. Click on the line thickness that you want to use.
6. Move the mouse cursor over to the work area of EasyBuilder onto the window that you are
currently editing. The mouse cursor has changed from an arrow to a crosshair cursor.
7. Click to mark a corner of the rectangle. Move the mouse to where the opposite corner of the
rectangle should be. Click the mouse cursor again to mark the corner of the rectangle. The
rectangle object is formed and displayed on the window screen with small white square
blocks around the perimeter of the rectangle.
8. To continue creating more rectangles repeat the last step. To move the rectangle just created,
click on the Select option from the Edit menu or click the Select icon in the Draw toolbar.
Move the rectangle to the preferred location.
9. To change any of the attributes, double-click on the rectangle to display the Rectangle
Object's Attribute dialog box.
The El lipse/Cir cle Tool
The ellipse tool is used to create ellipses or circles. Each ellipse created has four parameters associated with it: size,
thickness, color, and filled.
To create an ellipse
1. From the Draw menu, click Ellipse/Circle or click the Ellipse/Circle icon in the Draw
toolbar. The Attributes dialog box appears.
2. If the interior of the ellipse is to be filled with a color, check the Filled box. Two additional
settings appear.
3. If you want to fill the ellipse with a solid color, then select a color for the Interior box. Click
Pattern Style to display the Pattern Style dialog box. Select the upper left-most pattern for a
solid color. If you want to use a pattern for the filled section of the ellipse, then select from
the available patterns, and click OK to exit the Pattern Style dialog box. In the Attributes
dialog box, select the Pattern color.
4. In the Frame section, click the pull-down arrow of the Color box and select a color. Click
OK in the Color dialog box to go back to the Attributes dialog box.
5. Click on the line thickness that you want to use.
6. Move the mouse cursor over to the work area of EasyBuilder onto the window that you are
currently editing. The mouse cursor has changed from an arrow to a crosshair cursor.
7. Click to mark a corner of the ellipse. Move the mouse to where the opposite corner of the
ellipse should be. Click the mouse cursor again to mark the ellipse. The ellipse object is
formed and displayed on the window screen with small white square blocks around the
perimeter of the ellipse.
8. To continue creating more ellipses repeat the last step. To move the ellipse just created, click
on the Select option from the Edit menu or click the Select icon in the Draw toolbar. Move
the ellipse to the preferred location.
9. To change any of the attributes, double-click on the ellipse to display the Ellipse Object's
Attribute dialog box.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
