Initializing Ports For Port Based 802.1X - D-Link DES-3010F Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Configure the following 802.1x capability settings:
Parameter
From and To
Capability

Initializing Ports for Port Based 802.1x

Existing 802.1x port and MAC settings are displayed and can be configured using the window below.
Click Security > 802.1X > Initialize Ports to view the following window:
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the window
displays the current status of the port(s).
This window displays the following information:
Parameter
From and To
Port
MAC Address
Auth PAE State
Description
Ports being configured for 802.1x settings.
Two role choices can be selected:
Authenticator - A user must pass the authentication process to gain access to the
network.
None - The port will not be controlled by the 802.1x functions.
Figure 10- 16. Initialize Port window
Description
Select ports to be initialized.
A read only field indicating a port on the Switch.
The MAC address of the Switch connected to the corresponding port, if any.
The Authenticator PAE State will display one of the following: Initialize, Discon-
nected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth or
ForceUnauth.
127