Replacing The Cover - Lenovo System x3250 M5 Installation And Service Manual

Figure 72. Air baffle installation
Step 2. Reinstall the cover (see "Replacing the cover" on page 80).
What to do next
1. Install the server into the rack enclosure and push the server into the rack until it clicks into place.
2. Reconnect the power cords and any cables that you removed.
3. Turn on the peripheral devices and the server.

Replacing the cover

Use this information to replace the cover.
Make sure that all cables, adapters, and other server components are installed and seated correctly and
that you have not left loose tools or parts inside the server. Also, make sure that all internal cables are
correctly routed.
Important: Before you slide the cover forward, make sure that all the tabs on the front, rear, and side of
the cover engage the chassis correctly. If all the tabs do not engage the chassis correctly, it will be very
difficult to remove the cover later.
To replace the server cover, complete the following steps.
Step 1. Position the cover on top of the server.
Step 2. Slide the cover toward the front of the server.
80
Lenovo System x3250 M5Installation and Service Guide