Figure 133. USB cable and operator information panel cable connection
Step 3.
Reinstall the cover (see "Replacing the cover" on page 158).
What to do next
1. Install the server into the rack enclosure and push the server into the rack until it clicks into place.
2. Reconnect the power cords and any cables that you removed.
3. Turn on the peripheral devices and the server.
Removing the Operating temperature enhancement kit
Use this information to remove the Operating temperature enhancement kit in the server.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 31.
If you are replacing a server component in the server, you need to slide the server out from the rack
enclosure, turn off the server and peripheral devices, and disconnect the power cords and all external cables.
To remove the Operating temperature enhancement kit, complete the following steps.
Step 1.
Remove the cover (see "Removing the cover" on page 157).
204
Lenovo System x3250 M5Installation and Service Guide