Lenovo System x3250 M5 Installation And Service Manual page 314

Update the IMM firmware to a version that the server supports. Important: Some cluster solutions
require specific code levels or coordinated code updates. If the device is part of a cluster solution,
verify that the latest level of code is supported for the cluster solution before you update the code.
• 40000020-00000000 : Management Controller [arg1] Reset was caused by restoring default values.
This message is for the use case where a Management Controller has been reset due to a user restoring
the configuration to default values.
May also be shown as 4000002000000000 or 0x4000002000000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix: IMM ID: 0032
User Response
Information only; no action is required.
• 40000021-00000000 : Management Controller [arg1] clock has been set from NTP server [arg2].
This message is for the use case where a Management Controller clock has been set from the Network
Time Protocol server.
May also be shown as 4000002100000000 or 0x4000002100000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix: IMM ID: 0033
300
Lenovo System x3250 M5Installation and Service Guide