Orange on a component or an orange label on or near a component indicates that the component can be
hot-swapped, which means that if the server and operating system support hot-swap capability, you can
remove or install the component while the server is running.
Note: Orange can also indicate touch points on hot-swap components.
See the instructions for removing or installing a specific hot-swap component for any additional procedures
that you might have to perform before you remove or install the component.
System-board internal connectors
The following illustration shows the internal connectors on the system board.
Figure 17. Internal connectors on the system board
System-board external connectors
The following illustration shows the external connectors on the system board.
26
Lenovo System x3250 M5Installation and Service Guide