Using The Serverguide Setup And Installation Cd - Lenovo System x3250 M5 Installation And Service Manual

• Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the Ethernet controller" on
page 99.
• Features on Demand software Ethernet software
The server provides Features on Demand software Ethernet support. You can purchase a Features on
Demand software upgrade key for Fibre Channel over Ethernet (FCoE) and iSCSI storage protocols. For
more information, see "Enabling Features on Demand Ethernet software" on page 100.
• Features on Demand software RAID software
The server provides Features on Demand software RAID support. You can purchase a Features on
Demand software upgrade key for RAID. For more information, see "Enabling Features on Demand
RAID software" on page 100.
• Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM2 settings.
Use the ASU program online or out of band to modify UEFI settings from the command line without the
need to restart the server to run the Setup utility. For more information about using this program, see
"Advanced Settings Utility program" on page 100.
• Configuring RAID arrays
For information about configuring RAID arrays, see "Configuring RAID arrays" on page 100.
The following table lists the different server configurations and the applications that are available for
configuring and managing RAID arrays.
Table 10. Server configuration and applications for configuring and managing RAID arrays
Server configuration
ServeRAID-H1110 adapter
ServeRAID-M1115 adapter
ServeRAID-M5110 adapter
ServeRAID-M5120 adapter
Notes:
1. For more information about the Human Interface Infrastructure (HII) and SAS2IRCU, go to
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088601.
2. For more information about the MegaRAID, go to
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5073015.

Using the ServerGuide Setup and Installation CD

Use this information as an overview for using the ServerGuide Setup and Installation CD.
RAID array configuration (before
operating system is installed)
LSI Utility (Setup utility, press
Ctrl+C), ServerGuide, Human
Interface Infrastructure (HII)
MegaRAID BIOS Configuration Utility
(press Ctrl+H to start), pre-boot CLI
(press Ctrl+P to start), ServerGuide,
HII
MegaRAID BIOS Configuration Utility
(press Ctrl+H to start), pre-boot CLI
(press Ctrl+P to start), ServerGuide,
HII
MegaRAID BIOS Configuration Utility
(press Ctrl+H to start), pre-boot CLI
(press Ctrl+P to start), ServerGuide,
HII
Chapter 3
RAID array management (after
operating system is installed)
MegaRAID Storage Manager (MSM),
SAS2IRCU (Command Line) Utility
for Storage Management
MegaRAID Storage Manager (MSM),
MegaCLI (Command Line Interface),
and Lenovo Director
MegaRAID Storage Manager (MSM),
MegaCLI, and Lenovo Director
MegaRAID Storage Manager (MSM),
MegaCLI, and Lenovo Director
.
Configuration information and instructions
87