Figure 179. Correct way of removing the power cable connector from the system board
Step 7.
Disconnect the cables from the hard disk drive backplane or the backplate assembly.
Step 8.
Disconnect the power cable from the DVD power cable (if available).
Step 9.
Disconnect all other cables on the system board that block the removal of the power paddle card.
Step 10. Lift the power paddle card up to remove it from the server.
Figure 180. Power paddle card removal
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
.
Chapter 6
Removing and replacing server components
251