Lenovo System x3250 M5 Installation And Service Manual page 261

Figure 175. 240 VA safety cover removal
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Replacing the 240 VA safety cover
Use this information to replace the 240 VA safety cover.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 31.
If you are replacing a server component in the server, you need to slide the server out from the rack
enclosure, turn off the server and peripheral devices, and disconnect the power cords and all external cables.
To replace the 240 VA safety cover, complete the following steps:
Step 1. Align the safety cover with the standoffs on the power paddle card and lower the safety cover
onto the power paddle card until it is secure.
.
Chapter 6 Removing and replacing server components
247