Lenovo System x3250 M5 Installation And Service Manual page 293

Figure 205. Eight hot-swap hard disk drives with ServeRAID SAS/SATA controller cable connection (hardware RAID card
inserted on the left side)
Note: Make sure you connect the mini-SAS cable connector 0 to the hot-swap hard disk drive backplane 0
and the mini-SAS cable connector 1 to the hot-swap hard disk drive backplane 1.
Cabling the simple-swap hard disk drive with ServeRAID SAS/SATA controller (redundant power
supply model)
The internal routing and connectors for the simple-swap hard disk drive with ServeRAID SAS/SATA controller
(redundant power supply model).
The following illustrations show the internal routing and connectors for the 2.5-inch simple-swap hard disk
drive models with ServeRAID SAS/SATA controller.
Note: Make sure the relevant cables pass through the cable clips.
279
.
Chapter 6 Removing and replacing server components