Lenovo System x3250 M5 Installation And Service Manual page 278

Figure 190. Operator information panel cable connection
Cabling the front USB cable
The internal routing and connectors for the front USB cable.
The following notes describe additional information you must consider when you install or remove the
USB cable:
• To remove the USB cable on the system board, you have to press on the release latch on the top of the
USB cable connector before you can pull out and disengage the USB cable connector from the USB
connector on the system board. Pulling the cable out of the connector by excessive force might cause
damage to the cable or connector.
• To connect the USB cable on the system board, press on the release latch on the top of the USB cable
connector. Pressing on one side of the cable connector might cause damage to the cable or connector.
The following illustrations show the internal routing and connectors for the front USB cable.
Note: Make sure the relevant cables pass through the cable clips.
264
Lenovo System x3250 M5Installation and Service Guide