Figure 23. Air baffle removal
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
Installing the 2.5-inch simple-swap hard disk drive backplate assembly
Use this information to install the 2.5-inch simple-swap hard disk drive backplate assembly.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 31.
If you are installing an optional device in the server, you need to slide the server out from the rack enclosure,
turn off the server and peripheral devices, and disconnect the power cords and all external cables.
There are three types of 2.5-inch simple-swap hard disk drive backplate assemblies:
.
Chapter 2
Installing optional devices
35