Figure 146. Fixed power supply removal
Step 3.
Remove the screw that holds the power supply to the rear of the chassis.
Step 4.
Loosen the captive thumbscrew that secures the power supply to the chassis bottom.
Step 5.
Lift the power supply out of the bay.
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Replacing the fixed power supply
Use this information to replace the fixed power supply.
When you remove or install the fixed power supply, observe the following precautions.
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
.
Chapter 6
Removing and replacing server components
217