Replacing The System Board - Lenovo System x3250 M5 Installation And Service Manual

Hide thumbs Also See for System x3250 M5:

Table of Contents

Figure 184. System board removal

Carefully hold on to the edges of the system board. Avoid touching the connectors on the system

board. Lift and tilt the system board upwards and slightly pull the system board forward (towards

yourself). Then carefully lift and remove the system board from the server.

Note: When you remove the system board from the server, avoid touching the cable clips on

the side of the chassis and the connectors on the system board. Be careful not to damage any

surrounding components inside the chassis.

If you are instructed to return the server component or optional device, follow all packaging instructions,

and use any packaging materials for shipping that are supplied to you.

Attention: Make sure to place the socket cover for the microprocessor socket on the system board before

returning the system board.

Replacing the system board

Use this information to replace the system board.

Lenovo System x3250 M5Installation and Service Guide