Figure 75. Input and output connectors on the front of the 2.5-inch hard disk drive server model
The following illustration shows the locations of the input and output connectors on the rear of the server.
Figure 76. Input and output connectors on the back of the fixed power-supply server model
Figure 77. Input and output connectors on the back of the redundant power-supply server model
Step 1.
You must turn off the server before you connect or disconnect cables.
Step 2.
See the documentation that comes with any external devices for additional cabling instructions. It
might be easier for you to route cables before you connect the devices to the server.
82
Lenovo System x3250 M5Installation and Service Guide