Lenovo System x3250 M5 Installation And Service Manual page 112

Step 7. Convert the binary back to hexadecimal (for example, 5E F3FCFFFE5EAAD0).
Obtaining the IP address for the IMM2
Use this information to obtain the IP address for the IMM2.
To access the web interface to use the remote presence feature, you need the IP address or host name
of the IMM2. You can obtain the IMM2 IP address through the Setup utility and you can obtain the IMM2
host name from the IMM2 network access tag. The server comes with a default IP address for the IMM2 of
192.168.70.125.
To obtain the IP address, complete the following steps:
Step 1. Turn off the server.
Note: Approximately 5 to 10 seconds after the server is connected to power, the power-control
button becomes active.
When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed on the screen for
Step 2.
only a few seconds. You must press F1 quickly.) If you have set both a power-on password and
an administrator password, you must type the administrator password to access the full Setup
utility menu.
Step 3. From the Setup utility main menu, select System Settings.
Step 4. On the next screen, select Integrated Management Module.
Step 5. On the next screen, select Network Configuration.
Step 6. Find the IP address and write it down.
Step 7. Exit from the Setup utility.
Logging on to the web interface
Use this information to log on to the web interface.
To log on to the IMM2 web interface, complete the following steps:
Step 1. On a system that is connected to the server, open a web browser. In the Address or URL field,
type the IP address or host name of the IMM2 to which you want to connect.
Note: If you are logging on to the IMM2 for the first time after installation, the IMM2 defaults to
DHCP. If a DHCP host is not available, the IMM2 assigns a static IP address of 192.168.70.125.
TheIMM2 network access tag provides the default host name of the IMM2 and does not require
you to start the server.
Step 2. On the Login page, type the user name and password. If you are using the IMM2 for the first time,
you can obtain the user name and password from your system administrator. All login attempts are
documented in the system-event log.
Note: The IMM2 is set initially with a user name of USERID and password of PASSW0RD (with a
zero, not a the letter O). You have read/write access. You must change the default password the
first time you log on.
Step 3. Click Log in to start the session. The System Status and Health page provides a quick view
of the system status.
Note: If you boot to the operating system while in the IMM2 GUI and the message "Booting OS or in
unsupported OS" is displayed under System Status ➙ System State, disable Windows 2008 or 2012
firewall or type the following command in the Windows 2008 or 2012 console. This might also affect
blue-screen capture features.
98
Lenovo System x3250 M5Installation and Service Guide