Table of Contents
Advertisement
Chapter 2
Troubleshooting
This chapter provides information on isolating and resolving problems with
FORMULA 8200 operation.
Ethernet networks tend to be fairly simple, but they can still have problems
that take time to resolve. The most common problems are associated with the
actual network cabling.
If you have problems with a newly established network (initial setup), the
trouble is most likely related to cabling or addressing. If the network has been
operational for an extended period and is now beginning to have problems, the
trouble is probably related to recent additions or changes to the network, or
configuration settings on your switch.
If you have trouble performing any of the steps in this chapter, or if you
have questions not covered in this manual, contact Allied Telesyn's
Technical Support Department. See Appendix D, "Where To Find Us,"
for contact information.
Areas to Check
The following pages describe the areas to check when troubleshooting the
switch:
LED status
IP Addressing
Network cabling
Note
13
Advertisement
Table of Contents
Need help?
Do you have a question about the Formula 8200 and is the answer not in the manual?