Tdd-3D Sync Delay; Tdm-3D Mode - Christie 4K35-RGB Technical Reference

(SZP 1)
Stretch the video horizontally:
(SZP 3)
TDD–3D Sync Delay
Configures where the sync pulse occurs in relation to the transition from on time to off time in the
DMDs, in microseconds.
Only applies to: Models with the Mirage license applied
Commands
Command Description
TDD? Returns the 3D emitter delay value on main
video. (Read-only)
TDD <value> Configures where the sync pulse occurs.
(Saved value)
Enabled when the selected signal is a 3D
signal, 3D mode is enabled, and 3D Sync
Out is set to Emitter.
Examples
Return the 3D emitter delay value on main video:
(TDD?)
Set 3D emitter delay to 20.00 milliseconds on main video:
(TDD 2000)
TDM–3D Mode
Controls when input signals are processed as 3D or not.
Only applies to: Models with the Mirage license applied
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
—
0 = Lines up the sync pulse with the
transition (Default)
Negative value = Configures the sync pulse
to be slightly before the transition
Positive value = Configures the sync pulse
to be slightly after the transition
58