Boom Valve Manifold Assembly (Multi Pro 1250) - Toro Multi Pro 1200 Service Manual

Boom Valve Manifold Assembly (Multi Pro 1250)

NOTE: ARROWS SHOW FLUID
FLOW DIRECTION
1
7
12
18
4
18
1. Boom valve motor (3 used)
2. Hose barb (boom supply) (3 used)
3. Pressure gauge port
4. Flange
5. Flynut
6. Elbow fitting (boom bypass)
7. Mounting bracket (2 used)
The Multi Pro 1250 uses three (3) boom valve motor as-
semblies to control the spray booms. Each boom valve
motor assembly includes a motor section and a balanc-
ing valve assembly.
Spray System
1
12
13
2
11
16
8. Balancing valve assembly
9. Flange
10. Fork (3 used)
11. Fork (6 used)
12. O- -ring (4 used)
13. O- -ring (4 used)
3
1
7
9
12
12
11
14
19
Figure 47
The boom control switches on the operator spray con-
sole are used to energize the boom valve motors and
open the boom valves. The open boom valves allow sys-
tem flow to reach the appropriate boom section (right,
center or left).
Page 6 - - 42
16
10
13
8
15
14. O- -ring (3 used)
15. Balancing valve assembly (2 used)
16. Washer (4 used)
17. Cap screw (4 used)
18. Lock nut (4 used)
19. Cap
Multi Pro 1200/1250
17
5
6