Toro Multi Pro 1200 Service Manual page 131

Disassembly (Fig. 31)
IMPORTANT: Make sure to remove and neutralize
1
chemicals from spray components before disas-
sembly. Wear protective clothing, chemical resist-
ant gloves and eye protection during repair.
1. Remove master boom valve from machine (see
Spray Control (Multi Pro 1200) in this section).
2. Disassemble master boom valve using Figure 31 as
a guide. Discard all removed O--rings.
Assembly (Fig. 31)
NOTE: Coat all O--rings with vegetable oil before instal-
lation to reduce the chance of damage during assembly.
1. Assemble master boom valve using Figure 31 as a
guide. Replace all removed O--rings.
2. Install master boom valve to machine (see Spray
Control (Multi Pro 1200) in this section).
FRONT
Figure 32
1. Master boom valve
Multi Pro 1200/1250 Page 6 - - 31 Spray System