14.Install reverse shaft (item 1) into transaxle case. Ro-
tate main shaft and reverse shaft gears to mesh gears
when installing.
15.Install center plate onto transaxle:
A. Thoroughly clean mating surfaces of transaxle
case and center plate. Insert two (2) dowel pins into
transaxle case.
B. Apply silicone sealant onto mating surface of
center plate. Carefully install center plate onto trans-
axle case.
C. Install and tighten cap screws to a torque of 18 to
22 ft- -lb (24.5 to 29.5 N- -m) to secure center plate.
D. Apply multi--purpose grease onto lips of main
shaft oil seal. Insert oil seal into center plate flush
with face of housing.
Drive Train
Page 7 - - 52
1
Figure 90
18 to 22 ft- -lb
(24.5 to 29.5 N- -m)
Figure 91
Multi Pro 1200/1250