Specifications; Specifications; General Information; General Information - Toro Multi Pro 1200 Service Manual

Specifications

Item
Spray Pump
Spray Pressure Relief Valve
Sprayer Tank
Suction Strainer

General Information

Precautions Concerning Chemicals Used in Spray System

Chemicals can injure persons, animals, plants, soil and
other property. To eliminate environmental damage and
personal injury:
1. Select the proper chemical for the job.
2. Carefully read the directions printed on the chemical
manufacturer's labels before handling chemicals. In-
structions on chemical manufacturer's container labels
regarding mixing proportions should be read and strictly
followed.

Precautions for Removing or Adjusting Spray System Components

1. Stop the vehicle and set the parking brake.
2. Shut off the vehicle's engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
Spray System
3. Keep spray material away from skin. If spray material
comes in contact with a person, wash it off immediately
in accordance with manufacturer's recommendations
(refer to container labels and Material Safety Data
Sheets).
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipment as recommended by the chemical manufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure system pressure is relieved before loos-
ening any system component (e.g. spray valves, spray
system hose).
Page 6 - - 2
Description
Diaphragm Pump, 18 GPM @ 220 PSI
(26 GPM @ 0 PSI)
Poppet Style, 220 PSI Maximum
175 Gallon, Polyethylene
50 Mesh, Stainless Steel, Tank Mounted
(30 Mesh and 80 Mesh Optional)
Multi Pro 1200/1250