Toro Multi Pro 1200 Service Manual page 217

20.Install fork shaft case:
A. Thoroughly clean mating surface of transaxle
case and fork shaft case.
B. Insert spindle lock (item 1) between fork shafts.
C. Insert two (2) steel balls (item 2) and two (2)
springs (item 1) into the grooves of the center plate.
D. Apply silicone sealant to mating surface of fork
shaft case. Install fork shaft case (item 3). Install cap
screws (items 2 and 1) noting location of longer
screw (item 1). Tighten cap screws to a torque of 18
to 22 ft- -lb (24.5 to 29.5 N- -m). Check operation of
shifters and detent.
Multi Pro 1200/1250
1
2
2
3
Page 7 - - 55
1
Figure 97
1
2
Figure 98
18 to 22 ft- -lb
1
(24.5 to 29.5 N- -m)
2
Figure 99
Drive Train