Toro Multi Pro 1200 Service Manual page 127

Removal (Fig. 24)
IMPORTANT: Make sure to remove and neutralize
chemicals from spray components before disas-
sembly. Wear protective clothing, chemical resist-
ant gloves and eye protection during repair.
1. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch.
2. Remove master boom valve handle, spray console
panel and spray console from machine (Fig. 25).
3. Label hoses to allow proper installation after repairs
are completed. Loosen hose clamps and remove hoses
from hosebarbs that are to be disassembled.
4. Remove spray control components as required us-
ing Figures 24 and 26 as guides.
Assembly (Fig. 24)
1. Install spray control components using Figures 24
and 26 as guides.
2. Using labels placed during disassembly, install
hoses to hosebarbs and secure with hose clamps.
3. Operate spray system and check for leaks. Repair all
leaks before returning the sprayer to service.
4. Install spray console, spray control panel and master
boom valve handle to machine (Fig. 25).
Multi Pro 1200/1250
1
1. Boom valve handle
2. Spray console panel
4
1. Flowmeter
2. Pressure control valve
Page 6 - - 27
2
Figure 25
3. Spray console
3
2
1
FRONT
Figure 26
3. Master boom valve
4. Boom distribution valves
Spray System
3