Service And Repairs; Service And Repairs; Cvt Drive Belt Service - Toro Multi Pro 1200 Service Manual

Service and Repairs

CVT Drive Belt Service

CVT Drive Belt Inspection
NOTE: Perform this maintenance procedure at the in-
terval specified in the Operator's Manual.
1. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch.
2. Put vehicle transmission in neutral.
3. Rotate and inspect CVT drive belt for excessive wear
or damage. Replace belt as necessary.
CVT Drive Belt Replacement (Fig. 8)
1. To remove CVT drive belt:
A. While rotating the driven clutch, route belt over
the clutch.
B. Remove belt from the drive clutch.
2. To install CVT drive belt:
A. Place new belt around drive clutch.
B. Position belt to driven clutch. While rotating the
driven clutch, route belt into position on driven clutch.
Multi Pro 1200/1250
1. CVT drive belt
2. Driven clutch
Page 7 - - 11
1
2
3
Figure 8
3. Drive clutch
Drive Train