Tenant Service - Panasonic KX-TD500 System Reference Manual

4.00 Tenant Service

Description
A single system can be used as if two systems
were available.
This enables the configuration of two systems
which, in each case, are suited to a different
customer.
System
Tenant 1
(Customer 1)
Some of resources can be divided up between
the tenants and others are used in common.
A list of resources in each classification is given
below.
[Resources which can be divided up]
• Trunk Groups
• Attendant Consoles
• Extensions
• Direct Inward System Access (DISA)
• Automatic Gain Control (AGC)
• Number of Speed Dialing-System
• External pagers
• Doorphones
• Background Music or Music on Hold
• Number of Call Park-System parking zones
• Number of Flexible Absent Messages
• Number of possible Message Waiting
entries
• Passwords (Walking COS, PITS System
Programming)
[Common resources]
• Station Message Detail Recording (SMDR)
• Numbering Plan
• Class of Service (COS)
• Administration Device (On-Site, Remote
Location)
• Toll restriction tables
Tenant 2
(Customer 2)
3-B-8
To enable Tenant Service, set "System-
Operation", Tenant Service to "Yes".
"System-Tenant", programming is used to
determine how the resources will be divided up
between the tenants.
Programming
System Programming
"System-Operation (1/3)",
Tenant Service
"System-Tenant"
"Group-Trunk Group (1/3)",
Tenant
"Group-UCD/Paging Group",
Tenant
"Extension-Station(1/4)",
Tenant
"Extension-Doorphone",
Tenant
Conditions
The Night Mode can be operated separately for
each tenant.
Calling to extensions in the other tenant can be
enabled by setting "System-Tenant", Inter-Tenant
Calling to "Yes".
However, even when this function has been set
to "Yes," it is not possible to call the Attendant
Console in the other tenant.
A tenant number of each extension is determined
by the system programming "Extension-
Station(1/4)" screen.
When extensions belong to Call Pickup Group,
the tenant number of each extension must be
unique.
Refer to Section 10-E-3.00 "Call Pickup Group"
for the construction of groups.
Reference
VT Dumb
10-D-1.01 11-C-4.00
10-D-2.00 11-C-5.00
10-E-1.01 11-C-15.00
10-E-2.00 11-C-18.00
10-G-1.01 11-C-24.00
10-G-3.00 11-C-29.00