Panasonic KX-TD500 System Reference Manual page 211

1.01 Toll Restriction for Local
Trunk Dial Access
Flow Chart
The following flow chart shows the procedures for
restricting an extension user when an outgoing
CO call is made by dialing the feature number for
"Local CO line Access".
<1> When "Local Access" in
Class of Service is
programmed to "No RSTR".
<3> Is the trunk group type in "System-Local Access Group", Local Access
No
<4> Does the PBX Access Code coincide with the code registered in
<5> Compares TRLE in Class of Service with the Toll Restriction Level of
Prohibits
(Sends reorder
tone)
(Note)
Bracketed numbers (e.g., <1> <2>) link the items on the flow
chart with the associated programming.
(See the following page.)
<1> When "Local Access" in
Class of Service is
programmed to "W/RSTR".
<2>Is the selected trunk group
programmed to "Yes" in
"Class of Service—Trunk-
Group Access"?
Trunk Group Hunt Sequence 01 assigned to PBX?
"Group-Trunk Group", PBX Access Code with Restriction ?
Local Access (TRLL).
Executes 7 Digit Toll Restriction
Restricted
(Refer to 3-C-1.03)
Start
No
Yes
Yes
Yes
TRLE<TRLL
Not restricted
Calls
3-C-3
<1>When "Local Access" in
Class of Service is
programmed to "No Accs".
Prohibits
(Sends reorder
tone)
No
>
TRLE TRLL
Calls