F. Starting Up the KX-TD500 System
1.00 System Power-Up Procedure
Complete and check all installation procedures before connecting the AC power
cord (packaged separately).
1. First insert the AC power cord into the AC power cord connector on the back of the
base shelf as shown below.
2. Then insert the other end of the AC power cord into the AC outlet .
3. Turn on the Main Power Switch on the base shelf.
4. Turn on the power switch on the power unit of each expansion shelf.
• The power indicator on the power unit will light.
5 Turn on the power switch on the power unit of basic shelf.
Note :
Each shelf may be powered down individually, without powering down the entire
system.
2-F-1