Music On Hold - Panasonic KX-TD500 System Reference Manual

E. Holding Features

1.00 Music on Hold

Description
System built-in Music Source and/or External
Music Source (if available) provide Music on Hold
and Background Music.
Music on Hold is a programmable feature that
provides music from a music source to a party
placed on Hold.
This lets the waiting party know that he is still
connected.
For further information about Background Music,
refer to the followings.
Section 4-I-4.00 "Background Music (BGM)"
Section 4-H-2.00 "Background Music (BGM)
Section 5-F-2.00 through External Pager"
Section 6-I-2.00
<Using system built-in Music Source>
1. Set Music Source Selector Switch on the TSW
card to "INT MUS".
2. Assign "System-Operation (1/3)", External
Music Source 1,2 to "No, Yes".
3. Assign "Trunk Pager & Music Source",
For Use of Music Source 2 to "Hold" or "Hold &
BGM".
If you assign "BGM" to For Use, Music on Hold
is not provided to the party placed on Hold.
<Using the External Music Device>
1. Connect External Music Device (such as a
radio) to the system.
2. Set Music Selector Switch on the TSW card to
"MUS 2".
3. Assign "System-Operation (1/3)" External
Music Source 1, 2 to "Yes, Yes".
4. Assign "Trunk-Pager & Music Source",
For Use of Music Source 2 to "Hold" or "Hold &
BGM".
If you assign "BGM" to For Use, Music on Hold
is not provided to the party placed on Hold.
When Tenant Service is activated and two
External Music Devices are connected to the
system, the "Trunk-Pager & Music Source", Music
Source - Tenant setting determines which tenant
the external music device belongs to.
Programming
System Programming
"System-Operation (1/3)",
External Music Source 1, 2
"Trunk-Pager & Music Source",
Music Source - For Use
Music Source - Tenant
Conditions
A Music Source is not shared between tenant 1
and 2.
3-E-1
Reference
VT Dumb
10-D-1.01 11-C-4.00
11-C-22.00
10-F-2.00