13.00 Distinctive Dial Tone
Description
Multiple dial tone patterns are presented to the
extension user to give some information about
selected lines, features set to the lines, etc.
There are four dial tone types as follows:
Dial tone 1 : Normal dial tone, sounds when
calling on DN buttons.
Dial tone 2 : Sounds to request an account code
entry or DISA user code entry, or
sounds when an extension goes
off-hook after Timed Reminder.
Dial tone 3 : Sounds if the extension user has
set any of the following features:
• Call Forwarding/Do Not
Disturb
• Absent Message
• Timed Reminder
• Walking Station
• Walking COS
• Call Coverage Path
• Electronic Station Lockout
Dial tone 4 : Sounds if the extension user has
set UCD Log Out.
Programming
None
Conditions
The patterns for dial tone are listed in Section 3-
B-16.00 "Tone and Ringing Patterns".
3-B-23