Transfer Recall - Panasonic KX-TD500 System Reference Manual

3.00 Transfer Recall

Description
If a call transferred by the Unscreened Call
Transfer, Camp-On Transfer or Ringing Transfer
function is not answered by the destination party
within a preprogrammed time period, the call will
return to the extension user or attendant console
that transferred the call.
When the handset is on-hook or off-hook, the
Transfer Recall call signal or call waiting tone,
respectively, enables the party attempting the
transfer to be advised that the call has not been
answered. The call waiting tone sent when the
handset is off-hook, is heard through the speaker
in the case of a PITS and through the handset in
the case of an SLT.
The time taken to activate this function for the
extension or attendant console is set by "System-
System Timer", Transfer Recall.
Programming
System Programming
"System-System Timer",
Transfer Recall
Reference
VT Dumb
10-D-3.00 11-C-6.00
3-E-3
Conditions
When there are more than one parties on hold,
this function is started from the earliest time for
the transfer operation.
In a PITS, the CO line and extension Transfer
Recall call signals have the same ringing pattern
as the CO line and extension incoming call
signals, and a monotone call signal is sent.
While the Transfer Recall call signal or call
waiting tone is being sent, if your PITS has a
display, it shows:
• When the transfer destination extension does
not have a name programmed:
<Example>
RCL: Ext 1234
• When the transfer destination extension has a
name programmed:
<Example>
RCL: Jack
In an SLT, the CO line and extension Transfer
Recall signals are exactly the same as the CO
line and extension incoming call signals.
Extension number (DN)