Panasonic KX-TD500 System Reference Manual page 223

1.02 Simultaneous Ringing
Description
Programming
Conditions
When two attendant consoles are equipped with the KX-TD500 system, an
incoming outside call directed to the attendant console will ring on a LOOP
key of both attendant consoles simultaneously.
Incoming outside call
In Dual Console Operation mode, "Load Sharing" is the default setting.
This "Simultaneous Ringing" setting can be selected by using the WS3
command at Dumb programming mode.
Refer to Section 11-C-45.00 "World Select 3 (WS3)" for further information.
System Programming
"Group-Trunk Group (1/3)",
Incoming Mode (Day)
"World Select 3 (WS3)",
1. A call will ring simultaneously at both ATT1 and 2 when:
• An incoming call is routed via a CO line which belongs to a Trunk
Group whose Incoming Mode (Day) is assigned as "ATT".
• Both ATT1 and 2 are available to receive a call.
• An idle LOOP key is available at both ATT1 and 2.
Otherwise, a call will ring at either one of two attendant consoles.
2. Automatic Redirection If No Answer
If an incoming outside call (a call routed via a CO line which belongs to
a Trunk Group whose Incoming Mode (Day) is "ATT") ringing on a
LOOP key of two attendant consoles simultaneously is not answered
within a specified time (Attendant Overflow Time), it may be redirected
to the extension assigned as the overflow destination.
Refer to Section 6-G-7.00 "Automatic Redirection If No Answer" for
further information.
KX-TD500 System
#
#
$
Overflow Extension
3-D-5
KX-TD500 System
Reference
VT Dumb
11-C-15.00
10-E-1.01
11-C-45.00
—
ATT 1
ATT 2
Ringing at ATT 1 and ATT 2 (#)
↓
No Answer
↓
Time Out
↓
Ringing at overflow extension ($)
ATT 1 Ringing
ATT 2 Ringing