Panasonic KX-TD500 System Reference Manual page 225

2.00 Attendant Console-less
Operation
2.01 Direct In Line (DIL)
Description
Once set in system program, this function makes
it possible for an incoming call from a CO line to
go directly to an extension without assistance of
the attendant.
This function can be performed in two ways, as
described below.
DIL 1:1:For putting an incoming call from a CO
line trunk to a single destination
Assignable destinations are:
• Extension User
• FDN for Remote
• FDN for UCD group
DIL 1: N: For putting an incoming call from a CO
line to a maximum of 16 destinations
simultaneously
Assignable destinations are:
• Extension User
• Pickup Group
For DIL 1:1, set "Group-Trunk Group", Incoming
Mode (Day) to DIL 1:1, and program the CO
line to this Trunk Group using "Trunk- CO Line",
Trunk Group. Then set the incoming destination
in "Trunk-CO Line", Direct Termination.
For DIL 1: N, program "Group-Trunk Group",
Incoming Mode (Day) to DIL 1: N, and program
the "Group-Trunk Group", Destination (DIL 1: N
Only) Type and Number.
To use these functions in the Night mode, set the
Day mode to the DIL 1:1 or DIL 1: N setting, and
set "Group-Trunk Group", Incoming Mode (Night)
to Day Mode.
Programming
DIL 1:1
System Programming
"Group-Trunk Group (1/3)",
Incoming Mode (Day)
Incoming Mode (Night)
"Trunk-CO Line",
Trunk Group
Direct Termination
DIL 1: N
System Programming
"Group-Trunk Group (1/3)",
Incoming Mode (Day)
Incoming Mode (Night)
"Group-Trunk Group (2/3)",
Destination (DIL 1: N Only)
Type and Number
To use the DIL 1:1 and DIL 1: N functions,
program "Group-Trunk Group",Incoming/Outgoing
to Both-Way or Incoming Only.
Conditions
If CO buttons are assigned, an incoming call to a
PITS will arrive at one of the CO buttons (except
PCO button). If no CO button is assigned, it will
arrive at a PDN.
When a DIL 1:1 incoming call arrives at a PDN, it
will also arrive at a PITS having a SDN whose
owner is that PDN.
When a DIL 1: N incoming call arrives at a PDN,
it will not arrive at a PITS having a SDN whose
owner is that PDN.
It is programmable that an incoming CO call
routed via DIL 1:N feature arrives at "CO button
only" or "CO button or PDN button". For further
information, refer to Section 11-C-45.00 "World
Select 3 (WS3)".
3-D-7
Reference
VT Dumb
10-E-1.01 11-C-15.00
10-F-1.00 11-C-20.00
Reference
VT Dumb
10-E-1.01 11-C-15.00
10-E-1.02 11-C-16.00