Confirmation Tone - Panasonic KX-TD500 System Reference Manual

15.00 Confirmation Tone

Description
After several operations the system confirms the
success of the operation by sending a
confirmation tone to the extension user.
Multiple patterns of confirmation tone is sent
when the following operations have been
successfully conducted:
Confirmation tone 1 :
When a function is set, indicates that the new
setting differs from the previous setting.
Confirmation tone 2 :
When a function is set, indicates that the new
setting is identical to the previous setting. In
addition, the tone is sent when holding a
calling party (including Consultation Hold and
Call Park) or setting Call Park and when
releasing Message Waiting, and setting BGM
through External Pager on and off.
Confirmation tone 3 :
The tone is sent when calling by OHCA,
answering by Call Pickup or by Call Hold
Retrieve-Station, or when making and
answering the paging announcement, or
when calling a doorphone or starting
conference, and so on.
Confirmation tone 4 :
The tone is sent when converting conference
into a two party call.
A setting can be made by programming "System-
Operation", Beep Tone for Bsy-ovr/Brg-in to
determine whether confirmation tone is to be sent
or not when two party conversation is
successfully converted into a three party
conversation (Busy Override, Conference, etc.).
Confirmation tone from external pagers can be
selected to be sent or not in "Trunk-Pager &
Music Source", External Pager-Tone.
Refer to Section 3-B-16.00 "Tone and Ringing
Patterns" for the confirmation tone patterns.
Programming
System Programming
"System-Operation (1/3)",
Beep Tone for Bsy-ovr/Brg-in
"Trunk-Pager & Music Source",
External Pager-Tone
Conditions
Dial tone is sent after confirmation tone has been
sent. However, if the Automatic Callback to
Station function has been set, reorder tone is
sent after confirmation tone.
When a function is set using a PITS with the
display, details of the setting appear on the
display while confirmation tone is sent.
If any operation is performed, the message on
the display will be terminated at that time.
3-B-25
Reference
VT Dumb
11-C-4.00
10-D-1.01
10-F-2.00 11-C-21.00