Automatic Pause Insertion - Panasonic KX-TD500 System Reference Manual

3.00 Automatic Pause Insertion

Description
When a host PBX or Centrex is accessed and
PBX access code with no restriction or restriction
is programmed, a pause is automatically inserted
after the access code.
This function can only be executed for a trunk
group whose Type PBX. The access code after
which the pause is to be inserted is determined by
programming "Group-Trunk Group", PBX Access
Code (No Restriction) or (Restriction)
An example of using the system as behind PBX is
given below.
<Example>
Dial details: 811
Feature number for
selecting the CO line
When "9" is entered in "PBX Access Code (No
Restriction)", the pause is automatically inserted
after dialing 9.
When "9" is entered in "PBX Access Code
(Restriction)", the pause is automatically inserted
after dialing 9, and the outgoing restrictions are
checked for the "201 3456" phone number.
The length of the automatically inserted pause
depends on the "Group-Trunk Group", Pause
Time setting.
9 201 3456
Telephone
number
Host PBX CO line
access code
Programming
System Programming
"Group-Trunk Group (1/3)",
Type
Pause Time
"Group-Trunk Group (2/3)",
PBX Access Code (No
Restriction)
PBX Access Code (Restriction)
Conditions
When the type of the top priority trunk group is
PBX with the "System-Local Access Group",
Local Access Trunk Group Hunt Sequence
setting, all local access is considered to be host
PBX or Centrex line access. The data set in the
top priority trunk group is used as the data
required for the access.
In the same trunk group, the access codes set in
"PBX Access Code (No Restriction)" and "PBX
Access Code (Restriction)" must be different.
3-C-9
Reference
VT Dumb
10-E-1.01 11-C-15.00
11-C-16.00
10-E-1.02