HONDA
CBX7S0F
CLUTCH
• CLUTCH OUTER GUIDE
Measure the 1.0. of the clutch outer guide
.
SERVICE LIMIT: 25.08 mm 10.987 in)
;~.:'
.
.r-.
\
<,
'.
---;.
(1) CLUTCH OUTER
CLUTCH ASSEMBLY
Install the needle bearing into the clutch
outer.
Install the clutch outer over the mainshaft.
Install the clutch outer guide between the mainshaft
and clutch outer and push it in until it stops.
Push the clutch outer in while moving the primary
driven gears with a screwdriver. then further push
it in while moving the oil pump driven sprocket
with the screwdriver to fit the pins on the drive
sprocket into the holes in the clutch outer.
8-14