Table of Contents
Advertisement
3.7.10 ACL
Access Control List Configuration
If enabled, permits access to local management services from IP addresses contained in
the Access Control List.
If enable ACL, and then only the effective IP in ACL can access the router.
Step1
If you want to enable ACL, please choose "Enable" and then press "Apply
Changes" to apply your setting.
Step2
Click the Enable checkbox.
Step3
Enter the host IP address that you want to permit and click "Add".
Step4
Press "take effect" to enable the configuration.
Note: If you choose "Enable" in ACL Capability, please make sure that your host IP is
in ACL before it takes effect. Or you will not manage the device from your PC.
80
Advertisement
Table of Contents
