Logging Buffered; Logging Buffered Size; Clear Logging - Planet Networking & Communication WGSW-24010 User Manual

3.24.4 logging buffered

The logging buffered global configuration command limits syslog messages displayed from an internal buffer based on
severity. To cancel the buffer use, use the no form of this command.
Syntax
logging buffered level
no logging buffered
§ level — Limits the message logging to a specified level buffer: emergencies, alerts, critical, errors, warnings,
notifications, informational, debugging.
Default Configuration
The default level is informational.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the commands displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer based on the severity level "debugging".
Console (config)# logging buffered debugging

3.24.5 logging buffered size

The logging buffered size global configuration command changes the number of syslog messages stored in the internal
buffer. To return the number of messages stored in the internal buffer to the default value, use the no form of this
command.
Syntax
logging buffered size number
no logging buffered size
§ number — Numeric value indicating the maximum number of messages stored in the history table. (Range: 20 -
400)
Default Configuration
The default number of messages is 200.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the number of syslog messages stored in the internal buffer to 300.
Console (config)# logging buffered size 300

3.24.6 clear logging

The clear logging privileged EXEC command clears messages from the internal logging buffer.
Syntax
clear logging
Default Configuration
This command has no default configuration.
138