4.1.1 Channel Configuration
To set direction, Min Data Rate, Max Date Rate, and Max Interleve Delay of channl1,
click on the ChannelConfig in the left navigation bar, show as below.
The screen contains the following details:
Setting
Direction
Min Date Rate
Max Date Rate
Max Interleave Delay Maximum Interleave Delay, by factory default is 10ms.
Click "CANCEL" to exit from this page without saving the changes.
Click "APPLY" at any time during configure to save the information that you
have been entered.
Description
To which direction shall the settings apply?
Upstream
Downstream
Minimum Payload Date Rate, by factory default is 64
kbps.
Maximum Payload Date Rate, by factory default is 15000
kbps.
47