Deleting A Job Program - Sharp AR-215 Operation Manual

JOB MEMORY
4 Select a program number from 1 to 9 using the numeric keys.
q
A screen indicating that the settings have been stored will appear and then the display
will return to the basic screen.
q
The numbers with a check mark are program numbers which already contain job
programs. If a program number containing a job program is entered, the message
"Storage number selected is already used. Replace it?" will appear to confirm the
selection. To replace an existing program with the new program, select "YES" with the
and keys and press the OK key.
q
If the existing program is not to be replaced, select "NO" with the
OK key, and select another register number.

Deleting a job program

1
Press the PROGRAM (P) key.
q
The JOB PROGRAMS screen will appear.
2 Use the
q
The DELETE JOB PROGRAM screen will appear.
q
To cancel the job memory mode, press the BACK key or the CLEAR ALL (CA) key.
52
and keys to select "DELETE" and press the OK key.
and
JOB PROGRAMS
RECALL
STORE
DELETE
DELETE JOB PROGRAM
1 2 3
4 5 6
7 8 9
[10-key]:SELECT
keys, press the