Adjusting The Sharpness Of An Image (Sharpness) - Sharp MX-C382SC Operation Manual

ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)

This is used to sharpen an image or make it softer.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Place the original in the automatic document feeder.
1
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Colour Adjustments] key.
(3) Touch the [Sharpness] key.
☞
[Colour Adjustments] KEY
Colour Adjustments
Sharpness
3
Press the [COLOUR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
The sharpness setting is also applied when black & white copies are made.
(page 2-30)
(page 2-84)
(1) (2)
OK
Cancel OK
Soft Sharp
).
Soft
Sharp
(page 1-36)
Adjust the image.
(1) Touch the [Soft] key or the [Sharp] key.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-87
COPIER
Contents