Transparency Film With Insert Sheets - Sharp MX-M350U Operation Manual

Transparency film with insert sheets

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.
Example: Inserting insert sheets between transparencies
Originals (1-sided)
Originals (2-sided)
Two-sided originals are only
supported when automatic
document feeder is used.
1 Load transparency film into the tray 2.
2 Press the [SYSTEM SETTINGS] key.
PY
SYSTEM
JOB STATUS SETTINGS
Touch the [PAPER TRAY SETTINGS] key.
3
PAPER TRAY
RINT
SETTINGS
ATA PRINTER
CONDITION
ORWARD
4 Touch the [TRAY SETTINGS] key.
SYSTEM SETTINGS
PAPER TRAY SETTINGS
TRAY SETTINGS
Insert sheets
Inserts can also be
copied on.
Remove any paper
already in the tray 2
before loading the
transparency film. (To
load paper in the tray 2,
see pages 2-6 and 2-7.)
The system settings
menu screen will
appear.
The paper tray selection
screen will appear.
● This function only operates in "one-sided to one-
sided" and "two-sided to one-sided" modes.
● Multiple copies cannot be selected in this mode.
● The inserts are inserted under each transparency
as shown at left.
● Select insert paper that is the same size as the
transparencies.
● Transparencies can be fed from the tray 2 or
bypass tray.
● If the transparencies are loaded in tray 2, be sure
to set the paper size and paper type as explained
on pages 2-5 and 2-6.
5 Touch the key to display the tray
settings screen of tray 2.
SYSTEM SETTINGS
PAPER TRAY SETTINGS
TYPE / SIZE
TRAY 1 PLAIN / 8 x11 1 / 2
DOC.
I-FAX
PRINT COPY FAX
FILING
6 Touch the [TYPE/SIZE] key.
PER TRAY SETTINGS
TYPE / SIZE
TRAY 2 PLAIN / 8 x11
1 / 2
DOC.
COPY FAX I-FAX
PRINT
FILING
7 Touch the [TRANSPARENCY] key.
TYPE.
LETTER HEAD HEAVY PAPER
PRE-PUNCHED LABELS
COLOR TRANSPARENCY
8 Touch the [OK] key.
SETTING
SIZE
1 / 2 1 / 2
AUTO-INCH 8 X11,8 X11R
AUTO-AB
A4,A4R,B5,B5R
X420 Y297
SIZE INPUT
If the paper size was changed from an inch size to an
AB size, or from an AB size to an inch size, be sure
to set the paper type and size as explained on steps
5 to 6 on page 2-5 and steps 7 to 10 on page 2-6.
SPECIAL MODES
OK
FIXED PAPER SIDE
1/8
DISABLE DUPLEX
DISABLE STAPLE
DISABLE PUNCH
TYPE OK
JAPANESE P/C
NON STANDARD
SIZE
2/2
5-23
5