StorageTek L700 Service Manual page 162

Library SCSI Y Cable
Replacement
1. Using a 3/16-in. hex driver, connect the four jackscrews through the left side of the bulkhead to the
Y cable connectors.
1
1
2. Insert the single connector end of the Y cable into the MPC/MPCL card. Make sure to connect the
cable to the correct jack.
3. Attach the two Y cable clamps.
4
4. Return the system to operation. See
5-22
1. Jackscrews
C65178
1. Differential jack
2. Cable clamps (2X)
1
3. Library Y cable
4. Single-ended jack
2
3
E65217
"Restoring Library Operation" on page
Fourteenth Edition
StorageTek Proprietary
5-140.
95846