StorageTek L700 Service Manual page 155

1. Review the information under
2. Carefully raise the Z carriage to the top of the Z column assembly.
3. Open the cable clamp on the left side of the hand-camera assembly.
CAUTION:
Possible equipment damage: Make sure to note to which bracket each cable
attaches. Connecting the cables incorrectly can seriously damage the hand-camera
components.
4. Disconnect P/J194A and P/J194B connectors from the bottom of the hand-camera assembly by
pressing the tabs on the cables.
1
2
95846
"Preparation" on page 5-1.
E65111
1. Cable clamp
2. Z cable connector (2X)
C65106
Fourteenth Edition
StorageTek Proprietary
Hand-Camera Assembly
5-15