Library Status; Table 2-7. Cap Status Messages; Table 2-8. Library Status Messages - StorageTek L700 Service Manual

Table 2-7. CAP Status Messages

Status Message
OPEN
CLOSED
CLOSED(LOCKED)
TRANSITION
UNKNOWN

Library Status

The library status line on the status screen indicates the current state of the
library. Table 2-8

Table 2-8. Library Status Messages

Status Message
LIB MAIN DOOR OPEN
LIB INIT REQUIRED
LIBRARY NOT READY
LIBRARY READY
LIB MAINTENANCE MODE
INTERVENTION
REQUIRED
LIB UNKNOWN STATE
95846
Explanation
The CAP door is currently open. (The Open indicator also is
on.) Cartridges may be entered into or removed from the
CAP magazines. But you cannot view the CAP magazine
contents through the operator panel menus.
The CAP door is currently closed.
The CAP door is currently closed and locked. Before the
customer can open the CAP door, they must issue a
command from their network's system console.
The CAP door has stalled while attempting to open.
The library does not recognize the current state of the CAP
door.
explains the status messages that might appear on this line.
Explanation
The library's front door is open. When you close it,
the library will reset (initialize)
The library requires initialization. You must press the
RESET
The library is not available to perform operator-
requested actions. Some status information might be
available through the network interfaces.
The library has completed initialization and is ready
to perform requested actions.
The library is offline because it is performing
diagnostic tests.
The library is experiencing a problem. The customer
should note the FSC (if the library has issued one)
and take appropriate action.
The library does not recognize its current state. The
customer should note the FSC (if the library has
issued one) and take appropriate action.
Fourteenth Edition
StorageTek Proprietary
button.
Auto Clean
2-47