Setting The Library Fibre Channel Port 0 Address - StorageTek L700 Service Manual

Operator Panel Entry
4. Press the
The Lib Config Menu will appear and the cursor will line up with LIB SCSI I/F
CONFIG.
5. Press the
The Lib SCSI I/F Config Menu will appear. (This menu also displays the type of
SCSI interface: differential or single-ended.)
6. Press the arrow buttons until the cursor underscores SCSI ID.
7. Press the
The Set Lib SCSI ID Menu will appear.
8. Press the up and down arrow buttons to select the correct ID.
9. Press the
abort.)
10. If the library SCSI ID is the only configuration value you wish to set at this time,
press the
reset the library, continue with the next section.

Setting the Library Fibre Channel Port 0 Address

If the control path for the library is Fibre Channel, you must set the Library's Fibre
Channel Port 0 address. The library Fibre Channel Port 0 address locates the library's
Port 0 on the Fibre Channel loop. Set the library Fibre Channel Port 0 address from the
Lib Fibre I/F Config Menu.
Note: Before you enter a Port 0 address, you must first set the library's Fibre Channel
Set the library Fibre Channel Port 0 address from the Lib Fibre I/F Config Menu.
To set the library Fibre Channel Port 0 address:
1. From the online status screen, press the
The Main Menu will display.
2. Press the down arrow button until the cursor underscores CONFIGURATION.
3. Press the
2-24
button.
SELECT
button.
SELECT
button.
SELECT
button to save the changes. (You may press the
SELECT
button. If you wish to set other configuration values before you
RESET
hard address option to enabled.
If you configure the library for soft addressing, you are allowing the network's
software to configure the Port 0 address. For this addressing approach, you must
set the Fibre Channel hard address option to disabled.
The default for the hard address option is disabled.
Consult with the system administrator before selecting the library's Port 0
addressing option.
button.
SELECT
Fourteenth Edition
StorageTek Proprietary
button.
MENU
button to
MENU
95846