Dns Configuration - StorageTek L700 Service Manual

DNS Configuration

Note: You must enter the Domain Name Service (DNS) configuration only if your
The first entry you must make for the DNS Configuration is the Domain Name (DMN)
field.
1. Press the arrow button until the cursor underscores DMN.
2. Press the
3. On the editing screen:
a. Press the up and down arrow buttons to select a value for each letter in the
b. Press the
c. Press the
4. Enter the main server's name, being sure to append the suffix .com at the end.
5. Press the
desired setting to save the changes. (You may press the
most field to abort.)
The second entry you must make is the primary DNS server's IP address.
1. Press the arrow button until the cursor underscores SVR Primary.
2. On the editing screen:
a. Press the up and down arrow buttons to select a value for each number in the
b. Press the
c. Press the
3. Press the
desired setting to save the changes. (You may press the
most field to abort.)
The third entry you may make is the secondary DNS server's IP address. This assumes
that your site has a secondary (or backup) server; if not, this entry is not required.
95846
Simplified Network Management Protocol (SNMP) agent is set to trap named
recipients; if SNMP is set for numbered recipients, no entries are required.
button. An editing screen appears.
SELECT
domain server's name.
button to move right to the next field.
SELECT
button to move left to the previous field.
MENU
button from the right-most field when the screen displays your
SELECT
primary domain server's IP address.
button to move right to the next field.
SELECT
button to move left to the previous field.Press the
MENU
button. An editing screen appears.
button from the right-most field when the screen displays your
SELECT
Fourteenth Edition
StorageTek Proprietary
Operator Panel Entry
button from the left-
MENU
SELECT
button from the left-
MENU
2-35