Requirements - StorageTek L700 Service Manual

StorageTek L-Series Library
Admin
StorageTek's L-Series Library Admin is an optional software product that resides
internally in the library and is activated by using a Web browser. This product
provides a Web-based, graphical user interface (GUI) that enables customers to
monitor and perform library operations remotely.
Some of the features of Library Admin include the ability to:
• Get a virtual view of the library's cells
• Load microcode
• Generate useful reports on the library, drives, FSCs, and media
• Obtain valuable statistics on the library, drive, cells, and cleaning cartridge
• View and modify the configuration of the library, drives, and network
• Set the cleaning cartridge threshold
• Enable SNMP and add trap recipients (see
For more information about StorageTek's L-Series Library Admin, visit:
http://stagesupport.storagetek.com/LibraryAdminHelp/LSA.HTM

Requirements

Before installing the L-Series Library Admin, verify that the following
requirements are met:
• Minimum system requirements:
-
-
• Microcode level 2.20.00 and later contains the L-Series Library Admin
software.
• Library Personality Module.
• Java™ Plug-in Software 1.4 or later.
You can download the Java plug-in from:
• Netscape Navigator 4.5 and later or Internet Explorer 5.0 and later
95846
200MHz processor
64 MB RAM (96 MB preferred).
http://java.sun.com/products/plugin
Fourteenth Edition
StorageTek Proprietary
Appendix B for more information)
C
C-1